ConcealedCarryMatch is supported by its audience. When you purchase via our links, we may get a commission. Learn more

SCCY Industries DVG-1 9mm Problems And How To Fix?

SCCY Industries DVG-1 9mm Problems And How To Fix?

The SCCY DVG-1, a compact and affordable 9mm pistol, has become a popular choice for concealed carry due to its slim profile and easy operation. However, like any mechanical device, it’s not immune to occasional issues. Whether you’re a seasoned DVG-1 owner or considering adding one to your arsenal, understanding common problems and potential fixes can keep your firearm running smoothly.

Top 4 SCCY Industries Dvg-1 9mm Problems

Failure to Feed

Status: The slide stutters after firing, failing to chamber the next round. A telltale click replaces the expected bang.


  • Stiff Magazine Springs: Brand new magazines might have springs so tight they struggle to push rounds properly. Think of them as needing a “break-in” period.
  • Worn Magazine Feed Lips: Over time, feed lips can bend or chip, misaligning cartridges and hindering chambering.
  • Improperly Seated Ammo: Rounds not pushed far enough into the magazine can get caught on the feed ramp, leading to malfunctions.


  • Break-in: Run a couple hundred rounds through those new magazines to loosen the springs naturally.
  • Magazine Replacement: Inspect feed lips for damage. If bent or chipped, replace the magazine for smooth feeding.
  • Double-check Loading: Ensure each round sits flush at the back of the magazine before inserting it into the firearm.

Failure to Extract

Status: Spent casings linger stubbornly in the chamber instead of ejecting after firing. This can jam the gun and render it unusable.


  • Debris Buildup: A dirty extractor groove, clogged with grime and burnt powder, can’t grip casings effectively for ejection.
  • Weak Extractor Springs: Years of use can weaken the extractor spring, hindering its ability to pull out spent casings.
  • Worn Chamber Walls: Extensive shooting can wear down the chamber’s smooth surface, causing casings to stick instead of gliding out.


  • Deep Cleaning: Disassemble the firearm and meticulously clean the extractor groove and chamber. Don’t forget the ejector port!
  • Spring Replacement: Check the extractor spring for signs of weakness and replace it if necessary.
  • Gunsmith Consult: If chamber wear is suspected, leave it to the professionals. They have the tools and expertise to diagnose and repair the issue.

Trigger Glitches

Status: The trigger pull feels heavy and sluggish, the reset is mushy or non-existent, or you might even experience light strikes where the hammer doesn’t hit the firing pin with enough force.


  • Worn Trigger Return Spring: This spring loses its “oomph” over time, resulting in a heavier trigger pull and an unreliable reset.
  • Disconnector Misalignment: Internal components can shift over time, causing the trigger to malfunction. Imagine tiny gears slipping out of sync.
  • Internal Debris: Grit and grime buildup inside the trigger mechanism can impede its smooth operation. Think of it like sand in the gears.


  • Spring Swap: Replacing the trigger return spring with a new one can often restore a crisp trigger pull and a clean reset.
  • Gunsmith Visit: For disconnector misalignment or internal debris, leave it to the experts. They’ll have the knowledge and tools to realign parts and clear out the gunk.
  • Trigger Upgrade (Advanced): Some experienced gun owners opt for aftermarket trigger kits that offer a lighter, smoother pull and more precise control. This, however, requires advanced knowledge and gunsmithing skills.


Status: Your shots hit consistently off-target, left, right, or high/low. You might even notice the sights themselves being visibly loose or wobbly.


  • Screw Looseness: Vibrations from firing can gradually loosen the tiny screws holding the sights in place, causing them to shift.
  • Sight Damage: Drops or bumps can bend or break the sights themselves, sending your aim astray.
  • Sighting Misalignment: Even if the sights seem fine, they might be inherently misaligned from the factory, leading to consistent inaccuracy.


  • Screwdriver Fix: Using a proper sight adjustment tool, carefully tighten the screws to secure the sights in their correct position.
  • Sight Replacement: If sights are damaged beyond repair, replace them with high-quality replacements.
  • Professional Sighting: For stubborn accuracy issues, consider consulting a gunsmith. They can use specialized tools and techniques to precisely align the sights for optimal accuracy.

How to maintain your SCCY DVG-1 9mm?

Maintaining your SCCY DVG-1 9mm is essential to ensure its reliable performance and longevity. Here are general guidelines for maintaining a semi-automatic pistol like the SCCY DVG-1:

Safety First:

  • Always follow the basic firearm safety rules.
  • Ensure the gun is unloaded before starting any maintenance.

Field Stripping:

  • Refer to your SCCY DVG-1 manual for specific instructions on field stripping.
  • Typically, you’ll need to remove the magazine, clear the chamber, and disassemble the gun according to the manufacturer’s guidelines.


  • Clean all components, including the barrel, slide, frame, and magazines.
  • Use a cleaning solvent and a bore brush to remove carbon buildup from the barrel.
  • Wipe down all parts with a clean cloth or patches.
  • Use a toothbrush or specialized gun cleaning brushes for hard-to-reach areas.


  • Check for any signs of wear, damage, or corrosion.
  • Inspect the recoil spring, guide rod, and other components for proper function.
  • Ensure that the barrel is free of obstructions and in good condition.


  • Apply a light coat of gun oil or lubricant to all moving parts, including the slide rails, barrel, and trigger components.
  • Be careful not to over-lubricate, as excess oil can attract dirt and debris.


  • Follow the manufacturer’s instructions for reassembling the firearm.
  • Make sure all parts are properly aligned and seated.

Function Check:

  • Perform a function check by dry firing the pistol (ensuring it is unloaded).
  • Confirm that the trigger, slide, and safety mechanisms are working correctly.

Ammunition Inspection:

  • Inspect your ammunition for any signs of damage or corrosion.
  • Use only high-quality, factory-manufactured ammunition recommended by SCCY.


  • Store your SCCY DVG-1 in a cool, dry place to prevent corrosion.
  • Consider using a gun safe or a secure storage solution to prevent unauthorized access.

Regular Maintenance Schedule:

  • Establish a regular maintenance schedule based on your usage frequency.
  • Even if you don’t use your firearm regularly, periodic inspections are crucial.

3 SCCY DVG-1 Alternatives (If you want to change your gun)


  • Ultra-concealable: The CPX-1 reigns supreme in compactness, making it ideal for deep concealment. Its single-stack design keeps the profile slim, perfect for pocket carry or disappearing under a light t-shirt.
  • Budget-friendly: The CPX-1 carries a wallet-friendly price tag, making it an attractive option for new gun owners or those on a budget.
  • Simple operation: Featuring a striker-fired trigger and minimal controls, the CPX-1 prioritizes ease of use. However, its smaller size might not be ideal for shooters with larger hands.

SIG P365

  • Firepower leader: The P365 packs an impressive 12+1 round capacity in a micro-compact frame, giving you more shots on target than most competitors.
  • Modular and customizable: The P365 boasts a wide range of aftermarket optics, sights, and triggers, allowing you to tailor it to your specific needs and preferences.
  • Slightly larger footprint: Compared to the CPX-1, the P365 offers a slightly bigger grip and sight radius, potentially improving control and accuracy for some shooters. However, its increased size might impact deep concealment.

Springfield Armory Hellcat RDP

  • Performance-oriented: The Hellcat RDP comes equipped with a red dot sight and compensator, making it a champion for fast and accurate shooting. The red dot facilitates rapid target acquisition, while the compensator tames muzzle flip for faster follow-up shots.
  • Aggressive grip: The Hellcat’s aggressive texturing provides excellent grip even in sweaty or wet conditions.
  • Larger than the CPX-1 and P365: The RDP’s longer slide and compensator sacrifice some concealability compared to the other two options.


In conclusion, while the SCCY DVG-1 is a reliable firearm, users may encounter occasional issues that can impact its performance. By addressing these four common problems and following the recommended solutions, gun owners can maintain the functionality and longevity of their SCCY DVG-1.

Regular maintenance, proper cleaning, and adherence to safety guidelines contribute to a positive shooting experience with this handgun. It is essential for users to stay informed, follow the manufacturer’s recommendations, and seek professional assistance when needed, ensuring a smooth and trouble-free operation of their SCCY DVG-1 firearms.

Shelly Jark Drakny

Weapon Specialist & Firearm Training

Shelly Jark Drakny is a retired SF weapons sergeant (E-5 or above) with a military occupational specialty (MOS) code 18B. He served 24 years in the military, including assignments in SF, Infantry, and Special Forces.

Army Special Forces (SF). Mr. Drakny served two deployments to Afghanistan with the SF Infantry and was stationed with 2nd SFG(A) in Fort Bragg, NC.

2 thoughts on “SCCY Industries DVG-1 9mm Problems And How To Fix?”

  1. Hey,

    The moment we’ve all been waiting for is finally here – GoBuildr is now LIVE! 🎉

    🌐 Create ultra-lightning-fast websites, sales funnels, eCommerce stores, and more in less than 60 seconds, with just a keyword!

    🚀 Say goodbye to the limitations of traditional page builders. GoBuildr combines the functionality of 16 different tools into one powerful app, supercharged with AI-assisted technology.

    ⇒ Click Here To Checkout Demo

  2. He Got 256,354 Free Views With AI…

    Can you believe it?

    People spend thousands of dollars to get that kind of result…

    My friend Kundan just did it for free…

    He only used his new app… AI ScreenSnap…

    It’s the world’s first AI app that can generate videos with the power of Video-Exclusive AI Engine…

    That can edit, record, and generate videos with just a few clicks… with zero experience…

    Click here now and watch AI ScreenSnap in action

Leave a Comment