Unlike other equipment with accompanying items, guns are often in many places. Still, one thing in common is that there are no additional accessories such as leather bags or ammunition.

Users can also request more but may need to surcharge a small fee to meet this request. Therefore, we will show you how to make a homemade gun holster based on relatively simple materials.

Dig into it now for details!

DIY Gun Holster: How To Homemade Gun Holster at Home

How To Make Homemade Gun Holsters?

After many tests, we found leather one of the best fabrics for gun holsters.

Of course, this is not forced; you can ultimately use other materials such as Kydex, as long as the item you create is correct and usable.

It’s easy if your hands are skillful; I bet the process is speedy because it is simply not too complicated.

DIY Gun Holster
How to make a perfect one

Things Needed

To start the process, you first need to prepare one of the following tools.

It will be more economical if you have these things in your home; try to use them to create a perfect gun bag.

  • Spool
  • Symbol pens
  • Knife
  • Ruler
  • Cement glue
  • Hammer
  • tension clamp
  • Gun mold
  • A model gun
  • And finally, indispensable leather cloth.

Step By Step To Make One

Based on heterogeneous materials, we will show you how to make gun holsters into three different types, and the steps will be pretty additional. Don’t be discouraged because it’s not that difficult.

Make a shoulder holster.

  • Using prepared cardboard, draw the pattern you want to make on it.

Any shape is possible, but keep the rules in mind to make sure the gun space fits appropriately, and there are two straps to secure.

  • Use two different leather pieces, cut according to the pattern you want, or use in-kind to approximate the size. Cut two shapes on two skins. Here are the front and back.
  • Mark the location of the gun’s existence in addition to the accompanying parts, if any.
  • Join the two pieces of leather fabric together with glue. Remember to avoid the gun holder. Mark with a hole punch, then trace and sew.
  • Prepare a bowl of water, and soak the skin surface in the water for a few minutes. When the skin is supple, drain the water and let it dry.
  • Cutaway the excess fabric and dye it to your liking
  • Prepare two more pieces of leather cloth, one of which is to wrap around the chest; the other piece can be wrapped from the holster to the shoulder.
  • Start attaching the small belt buckle to the end of the leather strap. Thread them and the buckles on the belt to create a complete gun bag strap.

Best Way To Make A Gun Holster

  • Step 1: Material options to create the holster. We recommend that you consider materials harder than Kydex, vinyl, soft leather, or felt as long as you feel comfortable.
  • Step 2: Draw the corresponding shape from the gun body to the barrel and then to the barrel. Looking at the picture, you will feel the process is almost halfway done. The distance between the curbs should be about 1 inch wide for easy repairs when needed.
  • Step 3: If it is leather, repeat soaking and wringing dry as above.
  • Step 4: Wrap the leather on the barrel and under the trigger. Use tensioners to apply pressure around and stretch it out. Next, use a pen to mark the identified positions. Bring the leather to dry in the sun to shape the bag.
  • Step 5: This is the step to create accessories for the holster. Create pads attached to the holster to keep the gun firmly in place while moving.
  • Step 6: Use scissors to cut the circle according to the previous points. Using a sharp razor, note that it’s a good idea to cut them wide just in case they need to be edited.
  • Step 7: Take a cloth that has been in the sun for a few hours. This time, the fabric is softer. Keep the correct shape of the gun mold. Dip them again in water, about ¾ of their original softness.
  • Step 8: Place the accessory inside the leather mold. Use hollow weapons instead of molds. It will help to align better; leave it for 24-48 hours to fix the skin in the correct position. Otherwise, when you put the gun in your pocket, it will not fit or be difficult.
  • Step 9: Feel by touching the sides in raised areas that may need repair. Glue the leather patch to the holster with fixing adhesives.
  • Step 10: When the glue has dried, remove the inner clips. Tested on a real pistol weapon to test the fit. Next, use a hammer and a needle to make holes in the contour. It is a way for users to sew hands faster.

Leather is a reasonably complex material, so an external force is needed to complete the needle stitching process efficiently.

  • Step 11: Next, use a curved needle to thread the thread and go through the fixed holes until the knots become as strong as possible. Usually, the craftsman will go through the needle line twice to ensure this factor.
  • Step 12: Complete the remaining steps, such as attaching the strap or attaching the button to complete a complete gun holster.

Make gun holsters from Kydex

How To Homemade Gun Holster at Home
Kydex

Based on the two-piece wire method is the process:

  • Step 1: Prepare a size of Kydex (PMMA/PVC), then measure the shape of a gun. Place the canvas on the surface of the work plane, and use a pen to draw sketches that do not need to be too precise. You can leave plenty of space as it can be over-cut in the following steps.
  • Step 2: Cut the Kydex into a square and place it in an oven preheated to 325 F. When the square edges shrink, the temperature will likely rise too quickly, which needs to be adjusted to minimize the risk.
  • Step 3: Use the press to make the mold. Leave the magazine in the gun for best results, but remove the ammunition to leave the magazine empty.
  • Step 4: Use the magazine to attach to the gun headpin.
  • Step 5: When the Kydex is warm and pliable enough, take it out of the oven. Take the material on the press and put down the weapon. Then folded to fix the gun shape. Then, put it into the press and stuck firmly in the position for 10 minutes.
  • Step 6: After a while, take it out and look closely at the results. If not satisfied, you can return the kiln and repeat the process.
  • Step 7: Take a pen to draw Kydex cutting lines, and mark the positions you will drill to fix. Use specialized equipment for die cutting and fine sanding. Finally, attach the nails to the previously drilled holes.
  • Step 8: Remove the magazine, and clean the holster and the gun. Put the test gun in the holster to test the fit and sturdiness. If you are not satisfied, you can put the Kydex back in to warm it and use your hands to press the points that do not fit.
  • Step 9: When creating a belt clip, use thicker material. Make nail marks on the clip, ensuring that it should work in line with the leather pouch.
  • Step 10: Use a thermal nail drill to make holes for landmarks. When you feel the Kydex start to warm up, immediately place it on the belt clip and tighten it with your fingers. Look for bends, similarly using a heat gun to create curvature, but the holes should still align.
  • Step 11: Finally, bend the belt arch to align to the proper size. Once cooled, cut off the excess.

FAQs

1. How long does it take to break in a holster?

You put the gun bag in a thick plastic bag. As long as the leather bag is of good quality, its lifespan is relatively high, lasting up to several years or even decades if it is carefully preserved.

2. Can a holster scratch your gun?

Depending on the material you choose, leather or felt fabric, this problem will not occur. Yet, the hard plastic Kydex used for a long time can cause the fig to lose its paint finish. They can be abrasive and leave tiny scratches.

3. What is the best material for a gun holster?

How To Homemade Gun Holster
Leather

In the process, we recommend choosing sturdy or durable materials. We mainly refer to leather, Kydex, or nylon fabrics almost by the three methods above. It can be that these are also the three best materials to make a quality gun holster.

Conclusion

The process of making a homemade gun holster is not too complicated. Many people have asked me how long it takes to complete this job. I think it’s up to each person’s ability, not a specific number.

The advice here is not to be discouraged because this process does not require any skills, care, and patience.

I hope this article will help you better understand the above incident. If you have any questions, please leave a comment. We will answer you as soon as possible.

Thank you for following this post!

Follow Concealed Carry Match to read more firearm, ammunition and gun accessories articles updated daily at: ConcealedCarryMatch.com

Leave a Reply

Your email address will not be published.