In addition to the army soldiers, the special services are well invested in sniper shooting skills to take down objects. It seems that the sport of holding a gun has become a conquering hobby for many people.

To become a high-level gunner, the first thing that must be is the skill of aiming and zoning the target line of sight. And this is even more difficult if placed in the case of not jerking, pulling the trigger when the newcomer aims.

So, how to sight in a red dot scope without shooting?

In the following article, we will guide you through a few skilled manipulations of looking at the red dotย range without taking a shot.

Basic knowledge of Boresighting

How To Sight In A Red Dot Scope Without Shooting?

Boresighting aims at the target by arranging the drill shaft of the gun barrel and the target in a straight line.

In other words, if you don’t want to shoot but still want to see your rifle, you must master how to shoot bullets, which helps a lot in the process, saving a lot of money for the number of ammo you currently have.

However, besides upgrading skills, making sure that your main rifle is stable is also essential because it determines a big part in the problem of creating an accurate shooting.

The Required Tool Techniques

There are two essential tools needed most: a gun and scope.

  • The gun shoots like a surefire item for you to accomplish your goals. Of course, this is included when the Ret Dog has been attached to its body.
  • Next is the laser; this is an accompanying light that makes it easier to determine the direction of the bullet; this pointer is usually attached to the end of the barrel or in the middle of the ammunition chamber.
  • Finally, there is the viewfinder, a calculated and purchased item that matches the diameter of the assembled rifle ring.

Balanced Forms

Visual display

It is a relatively essential and easy to master assessment skill, which determines the alignment of the scope in the center of the barrel. You can practice and complete it quickly, which helps get more accurate shots.

The first practice in the visual display is identifying the target by aiming the gun at an immovable object, adjusting the main buttons through the drill shaft, and zoning the thing.

Laser Boresighting

How To Sight In A Red Dot Scope Without Shooting? 1

We often see optical masking machines equipped on the bodies of soldiers and national soldiers. And the laser is increasingly popular because of the effectiveness it brings.

The most commonplace on the gun face is the barrel. Once fixed and operating, the red dot in the laser will appear in the shape of a cross.

Now, the job just needs to accurately align the target’s red marks and rotate the control buttons. An accurate aiming position for the bullet is ready.

Optical balance

The optical illuminator is slightly different from the laser light, which is brighter and more challenging to use. Usually, the pros assemble at the bottom of the weapon barrel and take the alignment steps clearly and thoughtfully.

Then align the lenses and viewfinder together. When looking at the red dots, you flick through the grid on your custom lens, rotate the crosshairs, and then aim.

How To Sight In A Red Dot Scope Without Shooting?

How To Sight In A Red Dot Scope Without Shooting? 2

Here are the basic steps to see within the red dot without taking a shot.

Learn everything on paper

The theory is an essential step for you to start shooting. An expert guide will record the basic knowledge and concepts on paper. Your task is to understand and understand the core of these meanings.

Measure your distance and the target

People will distinguish many different degrees of distance depending on your own experience.

Usually, in people with good marksmanship, 100 yards is the minimum a professional needs to achieve. In many cases, they can shoot far from the target, covering about 250 yards.

Besides, it is tough for newcomers to complete the goal well; it takes about a few days to get used to 20 to 30 meters.


The preparation is reflected in completing the participation profile, fully equipped with the necessary equipment. The items can be mentioned, such as guns, lasers, installation accessories, shields, and practice places.

Mount scope

In this step, you need to make sure everything is ready, and all parts are assembled stably. The scope and scope are all firmly attached to confirm no movement while operating.

Have the correct view of the goal

If put in the case, you are a core shooter with more than 10 years 20 years of experience. But if you are a novice, clearly define your aim to ensure that the object you want to shoot is within a certain grasping distance, not exceeding 25 yards. Finally, get on the barrel and go hunting!.

Red Dot Scope FAQ

What is the best distance to bore sight a rifle?

How To Sight In A Red Dot Scope Without Shooting? 3

With this question, the specific number we give you is about 15 yards to 25 yards zeroes. These are the most common aiming distance numbers, often hitting the target center. At longer distances, rare cases occur and are almost absent in newcomers.

Does the red dot sight turn on automatically?

The red dot’s lighting is determined through two cases: Standing still and moving. If the shooter is stationary and does not move, the red dot will not light up. It is an automatic shutdown signal.

On the contrary, the red point will automatically light up when the sniper moves. Customers highly appreciate this for its intelligence and long shelf life due to its large battery flow.

What does MOA stand for on a red dot sight?

MOA is a unit of optical dot representation, a division of measurement for the number of angles of a circle. Mentioning MOA, people will immediately think of the size of the red dot, the amount of red dot coverage in the distance.


This article is the basic knowledge of seeing the red angle without attribution and some related issues. We hope that the above will be of some help to you.

Thank you for reading!

Leave a Reply

Your email address will not be published.